Hi everyone:

I run into an issue without a clue to fix. The model works well on simulation or annual glare calculation; however, when I do climated-based calculation, it gives me an error in attachment. 

Can anyone help me with it? My model is too large to attach below. Is there any other email I can send to?

Thank you in advance. 

Zhe 

Views: 118

Attachments:

Reply to This

Replies to This Discussion

Hi Zhe,

You can e-mail the file to alstan@solemma.net, which I think does not have an attachment limit. A Dropbox / other service link is fine too.

Best,

Alstan

Hi Alstan:

Thank you so much for your quick reply. I've sent the model to the address. 

Please let me know if further information is required. 

Best, 

Zhe 

J. Alstan Jakubiec said:

Hi Zhe,

You can e-mail the file to alstan@solemma.net, which I think does not have an attachment limit. A Dropbox / other service link is fine too.

Best,

Alstan

Hi Zhe,

My calculation fails with the shading system,
> rtrace_dc: fatal - cannot find function file "mechoshade.cal"

Make sure that mechoshade.cal is located in C:\DIVA\Radiance\lib\. If that still doesn't work, you might want to save it in the C:\DIVA\Temp\MODEL3V\ folder.

Best,
Alstan

Hi Alstan:

Thank you for your help. Actually I don't think it's the mechoshade.cal, because I tried to calculate UDI without mechoshade but the same error. I'll copy the file in the folder and try once more. 

Below is the mechoshade.cal just in case. 

Best, 

Zhe

J. Alstan Jakubiec said:

Hi Zhe,

My calculation fails with the shading system,
> rtrace_dc: fatal - cannot find function file "mechoshade.cal"

Make sure that mechoshade.cal is located in C:\DIVA\Radiance\lib\. If that still doesn't work, you might want to save it in the C:\DIVA\Temp\MODEL3V\ folder.

Best,
Alstan
Attachments:

Sure -- I didn't have the file, so my calculation would not go any further. I will try with what you attached this evening.

Alstan

Hi Alstan:

I just ran it again and it works this time. I did copy the file to the folder. So I think this should be the reason. Please don't put extra time in it. Thank you for your help. 

Best, 

Zhe 


J. Alstan Jakubiec said:

Sure -- I didn't have the file, so my calculation would not go any further. I will try with what you attached this evening.

Alstan

Reply to Discussion

RSS

© 2018   Created by jeff niemasz.   Powered by

Badges  |  Report an Issue  |  Terms of Service