Ground temperatures

I have a question about the ground temperatures.

In the advanced settings of the 'run E+' component, there is a setting for the ground temperatures. Will it override the ground temperatures as specified in the weather data?

Views: 68

▶ Reply to This

Replies to This Discussion

Permalink Reply by Timur Dogan on March 2, 2018 at 8:10pm

Yes, you can copy the temperatures that you want to use from the weather file or bring them in from another source. Eg Energy Plus has a pre processing tool to calculate the ground temperatures more accurately. I however, often end up using the temperatures from the weather file. Select the depth you want to use and copy paste.

▶ Reply to Discussion

RSS

© 2019   Created by jeff niemasz.   Powered by

Badges  |  Report an Issue  |  Terms of Service