Dear all,

I am new to DIVA for Rhino and have been sent a Sketchup file to conduction a CBDM analysis on.

I have attempted to place nodes into my file with no success. I have tried "MeshtoNurbs", "MergeallFaces" and the "quadrangulatemesh" commands, but nothing seems to give me a planar surface to attach the nodes onto. 

I have attempted a straight import from Sketchup and converting the Sketchup file into a 3d DWG, but neither seems to help the process.

Is there anything I can do?

All the best,

Dan.

Views: 16

Reply to This

Replies to This Discussion

Hi Dan,

Have you tried just drawing the planar surface in Rhino?

Or you can try the Rhino command DupMeshEdge on the mesh, close the curve if needed then create a surface from those edge curves (PlanarSrf command).

Hi Jeff,

Thanks, I've manage to get the file functioning now 

jeff niemasz said:

Hi Dan,

Have you tried just drawing the planar surface in Rhino?

Or you can try the Rhino command DupMeshEdge on the mesh, close the curve if needed then create a surface from those edge curves (PlanarSrf command).

Reply to Discussion

RSS

© 2019   Created by jeff niemasz.   Powered by

Badges  |  Report an Issue  |  Terms of Service