Hi
First Thanks for great Diva program :)
I just want to make a Courtyard  zone, I got  Errors
I made it with other code in GH, and i explode it and defined it different material but after analysis in Diva,errors messages appear :
"brep face edge curves could not be joined into one curve..."
I thought i was right but after consider dxf file, it's appear without roof and floor (i attached the picture)
I attached the pictures and files
Could anyone help me to solve these errors? or suggestion?
Thanks in advance
Best

Views: 240

Attachments:

Reply to This

Replies to This Discussion

It would be best to break this up into four trapezoidal zones and run them separately.

 

Jon

Thanks Dear Jon
I must edit and write my code again, But it work :)
Just a quick question. About this type of form, it's better select which solar distribution in viber settings?
Best

Jon Sargent said:

It would be best to break this up into four trapezoidal zones and run them separately.

 

Jon

Full exterior with reflections should be fine.

Thanks
could you introduce a reference or links about studying different between solar disturbing  parameters in E+?
Sorry for again question
Best

Jon Sargent said:

Full exterior with reflections should be fine.

Thanks you so much for your time

Jon Sargent said:

Hi jon
I edited my Gh, and export for  E+ is fine
but about some face i got errors  :
   ** Warning ** Calculation of reflected solar onto surface=ZONE1_FACE_6 may be inaccurate
   ** Warning ** Calculation of reflected solar onto surface=ZONE1_FACE_11 may be inaccurate
   ** Warning ** Calculation of reflected solar onto surface=ZONE1_FACE_19 may be inaccurate
---------------------------
Do you know the reason?

Best

I wouldn't overly worry about it- it's probably a not severe geometry issue; see here for what could go wrong and why:

http://bigladdersoftware.com/epx/docs/8-0/engineering-reference/pag...

From the E+ engineering reference. All you ever (not) wanted to know about shading & solar calcs.

Thanks Max
I'll check it
thanks for link
Best

Max D said:

I wouldn't overly worry about it- it's probably a not severe geometry issue; see here for what could go wrong and why:

http://bigladdersoftware.com/epx/docs/8-0/engineering-reference/pag...

From the E+ engineering reference. All you ever (not) wanted to know about shading & solar calcs.

Reply to Discussion

RSS

© 2018   Created by jeff niemasz.   Powered by

Badges  |  Report an Issue  |  Terms of Service