I've seen other posts with people getting similar errors. Does anyone know why this is happening? Please help!
Added by Edward deJesus on March 8, 2019 at 3:09pm — No Comments
I am trying to run a section visualization in diva/grasshopper and study contrast ratio for a gymnasium wall. This is a south facing wall with a continuous band of glazing with 60% vlt. But every time i render it and see it under false color the glazing looks purple whereas it should be yellow cause it receives so much direct sunlight.
Does anyone know why this is happening. …Continue
Added by Divya Shroff on October 31, 2018 at 1:34pm — No Comments
I'm quite new to Diva and I am trying to find whether you can insert one single calculation point (node) rather than a grid of points. I haven't found this option yet and I'm not sure if it exists. The alternative I've considered so far is to insert a very small analysis surface and set the spacing between points to the maximum available to get the fewest points in it (ideally one if I get the spacing right).
Any views or comments on this would be really…Continue
Added by Cosmin on August 28, 2018 at 4:33am — No Comments
hello, I am using Diva 4.0 (trial Version ) and rhino 5.0.I wanted to get climate base daylight autonomy result. I have added location assigned materials and placed nodes(around 59000 nodes).But when i am running my simulation it takes hours of times and then simulation does not show any result and gives these warnings. Please give me suggestions how can I solve this problem.…Continue
Added by Baichi Chaki on May 14, 2018 at 10:10am — No Comments
Hi Team DIVA,
Problems with installation: projectinfo
I installed in Rhinoceros 5.0 DIVA for 64bit. My computer is 64bit.
My problem is with tool Location. When I try to inizializing the analysis with Location the program tell me Projecinfo.
Rhino is in the same language of DIVA.
The problem is there even when I use the program like administrator.
Under I attacked the screenshots of response:
Projectinfo (DIVA SCREEN SHOT2)
The files that I drag in Rhino.…
We did the simulation and we don´t know how to get a chart according with LEED requirements. Is there is enough with this DIVA image to support the credit?
Added by NICOLAS MOROS (SES)colombia on October 6, 2017 at 12:04pm — No Comments
We're really exciting to have someone join us to help push this exciting work forward. See job description below.
Please send your CV and appropriate support materials to: email@example.com with the heading: ‘Environmental Performance Analyst’
Added by Mark T Nicol on August 3, 2017 at 10:00am — No Comments
Added by firstname.lastname@example.org on November 15, 2016 at 2:58pm — No Comments
Passing this along for a colleague who is working on the conference planning -
Please consider submitting an abstract to Building Simulation 2017- the biennial conference of the International Building Performance Simulation Association (IBPSA). The conference will be held in San Francisco from August 7-9, 2017. This is the first time it has been held in the US since 1995.
Abstracts for peer-reviewed papers are due August…Continue
Added by Kera Lagios on July 12, 2016 at 7:42pm — No Comments
I am currently researching on Daylight and Emotion as part of my M.Arch thesis and I need your input! I need a certain mass of input for this research so I hope you can complete my survey here. It should take you less than 5 minutes.
Thank you and have a good day!
Solemma is announcing three lighting and energy performance workshops in collaboration with the Passive and Low Energy Architecture (PLEA) conference this year in Los Angeles, USA! Please see below for the course descriptions and registration links. We are looking forward to seeing some of you in Los Angeles.Continue
Download Link of Presentations in Higher Quality (dropbox):
There was always an idea of how…Continue
Added by Mahdi Soheyli Fard on October 18, 2015 at 10:59pm — No Comments
We are passing along a job posting for a Daylighting Design Specialist at Horton Lees Brogden (HLB) - multiple locations. If you are interested, please use the contact information in the PDF link below.
The DIVA Team
Added by Kera Lagios on July 21, 2015 at 11:46pm — No Comments
Dan Weissman, a long time DIVA enthusiast, taught students to use DIVA as an analysis and design tool throughout his Sustainable Systems 1 class last fall at the BAC (Boston Architectural College). Check out more of the students' work here.
Credit: Annika B. Nilsson Ripps…Continue
Added by Kera Lagios on February 10, 2015 at 11:46am — No Comments
After a week of silence with the download available, we would like to officially announce the release of DIVA-3.0! You may wish to view the presentation of new features from DIVA Day 2014: presentation, mp3 audio. DIVA now supports the new LEED…Continue
Added by J. Alstan Jakubiec on December 20, 2014 at 11:28am — No Comments
In preparation for DIVA Day 2014, we are pleased to announce the alpha release of DIVA version 3.0! With this update, DIVA supports the new LEED v4 metric via IES-LM-83's sDA metric. Also electric lighting is coming to DIVA with the ability to load in and position measured electric lighting data via IES files in the DIVA GUI. Please read the information below, and then feel free to try it out. Even if your DIVA-2.0 trial is…Continue
I wanted to let you all know that I will be teaching a full-day workshop on using DIVA and daylighting analysis for architectural design. This will take place on April 3rd at this year's Rhino Day in Guadalajara, Mexico. The price is $95, which includes a day of instruction, sample models and Grasshopper scripts, and a DIVA license…
Added by J. Alstan Jakubiec on March 14, 2014 at 3:03pm — No Comments
Dear DIVA Users,
We recently released DIVA 184.108.40.206 - Beta, available for download from the Solemma webpage. Since there was never a blog post made for the DIVA 2.1 series, below is a list of the major features and bug fixes. A complete list, as always, can be seen in the last three entries of the changelog. There are…Continue
Dear DIVA community,
during these past few years intensively working with & teaching DIVA, I have frequently observed the power of spatially representing daylight metrics to enhance the performance knowledge of designers and building science professionals alike.
Based on those experiences, I've authored a tool that extends the data domain of spatial metrics mapping to include the output of multi-zone thermal building simulations. It's available to you at…Continue
Added by Max D on October 14, 2013 at 5:00am — No Comments
Thanks everyone for your patience in waiting for these to get uploaded -
tremendous work presented by everyone. A really simulating, exciting day.Continue
Added by Kera Lagios on September 16, 2013 at 10:00am — No Comments